Operation Manual

Overview Appendices
Return to fi r s t page
52
Using Camera Control Pro
Camera Controls 7/12
The Mechanical Tab
The fol low ing settings can be ad just ed from the Me chan i cal tab:
Shoot ing Mode
Sets the shooting mode for D1-series cameras connected in PC mode to Single
or Continuous. Changes to this setting also apply to Custom Setting 30. The
shooting mode for the D70S, D70, and D50 can be selected from Single and
Continuous. Unless
Enable controls on the camera body
Enable controls on the camera body is checked in the
connection status area, the shooting mode for D2-series and D200 cameras
can be selected from Single, Continuous low speed, and Continuous high
speed. If Continuous is selected for the D70S, D70, or D50 or if Continuous
low speed or Continuous high speed is selected for a D2-series or D200 cam-
era, the AF and Shoot and Shoot buttons will instead be labeled AF and Start
and Start. If
Enable controls on the camera body
Enable controls on the camera body is checked or a D100 cam-
era is connected, the current shooting mode will be shown, but changes can
only be made using camera controls. See the camera manual for details.
Maximum Shots
D200 D2-series
D70S
D50
D70
Use the arrows to choose the maximum number of shots that can be taken in
a single burst in continuous mode, or enter a value directly in the text box. The
maximum permitted value varies with the current image-quality setting; the
value chosen should not, however, exceed the capacity of the camera memory
buff er as shown at the right edge of the LCD display. Values larger than the
capacity of the camera memory buff er will be shown in red. This setting only
applies when the camera is connected, and diff ers from the maximum selected
in the Custom Settings menu.