Operation Manual

Overview Appendices
Return to fi r s t page
44
Using Camera Control Pro
The Camera Control Pro Window 3/4
Shoot Buttons
Click either of these buttons to take a photograph at current settings. If a D2-series, D200,
D70S, D70, or D50 camera is connected, photos can be taken in continuous shooting mode;
in this case, the AF and Shoot and Shoot buttons will instead be labeled AF and Start
and Start. Continuous shooting with D1-series and D100 cameras can only be performed
with shutter-release button on the camera body; the shooting buttons in the “Camera Con-
trol Pro” dialog can only be used to take pictures one at a time.
AF and Shoot /
AF and Start
When this button is clicked, the camera will perform an autofocus operation
and then re lease the shut ter to take a pho to graph.
Shoot / Star t
Click this button to take a photograph. If the selected focus mode is AF-A (D50
only) or single-servo AF, an autofocus operation will be performed before the
shut ter is released.
The Function Dial
D100
The D100 can only be used to take photographs when the function dial is set to P, S, A, or M. At other
settings, the shoot buttons in the “Camera Control Pro” dialog will be disabled and the simulated
LCD panel will not be displayed.