Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Manual
- Reset
- Two-Button Reset
- Image Quality & Size
- Setting Language / Time / Date
- Using This Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Getting Started
- Basic Photography
- Basic Playback
- Advanced Photography
- Advanced Playback
- Printing Photographs
- Setup / Menus
- Optional Accessories
- Care / Maintenance
- Troubleshooting
- Error Messages
- Specs
- Index
- Scan of Software CD-ROM
- D60 Gold Edition Note
- Capture NX2 Software Trial
- Warranty
Custom Settings
07
Image
Review (Displayed When
Full
Is
Selected;
~
118)
IfOn (default setting)
is
selected, photographs will automatically be displayed in the
monitor
after shooting. The length
of
time
photographs
are
displayed depends on the
option
selected for Custom Setting
15
(Auto
off
timers;
~
114).
If Off
is
selected,
photographs can be displayed
in
the
monitor
by pressing [E].
09
AF-assist (Displayed When
Full
Is
Selected;
~
118)
IfOn (default setting)
is
selected and the subject
is
poorly lit, the AF-assist illuminator will
light when required
to
assist the focus operation
(~
57).
Choose Off
to
disable the
AF-
assist
illuminator. Note
that
when the illuminator
is
off, the camera may
not
be able
to
focus on poorly-lit subjects using autofocus.
10
ISO
Auto
(Displayed When
Full
Is
Selected;
~
118)
Choose whether the camera automatically adjusts
ISO
sensitivity
when optimal exposure cannot be achieved at
ISO
sensitivity
selected by the
user.
ISO
auto can be used
with
the flash. Available
in
P,
S,
A,
and M modes.
I
so
~~
1
10
.
~~x
sensitivity
. .
Min.
shutter
speed
Off
(default setting)
ISO
sensitivity will remain fixed at
the
value selected by
the
user
([153).
On
ISO
sensitivity will automatically be adjusted
if
optimal exposure cannot be achieved at
the
selected value (flash level
is
adjusted appropriately).
Max.
sensitivity
Photographs taken at higher
ISO
sensitivities often appear "grainy".
Choose
the
maximum
ISO
sensitivity
to
prevent
ISO
auto from increasing the
ISO
sensitivity setting
too
much.
ISO
auto will
not
raise
ISO
sensitivity above
the
selected
value.
Nlh).shutter speed
Choose
the
shutter speed at which
ISO
auto takes effect in modes Pand
A.ln
modes
P and
A,
sensitivity will only be adjusted
if
underexposure
would
result at the shutter
speed selected for this
option
(slower shutter speeds may be used
if
optimal exposure
cannot be achieved at the value selected for maximum sensitivity).
111