Owner's Manual

Camera
body
Lens,
mirror, and
viewfinder
Caring for the Camera
Stora~
When the camera will not be used for an extended period, replace
the monitor cover, remove the battery, and store the battery in a
cool,
dry area with the terminal cover in place. To prevent mold or
mildew, store the camera in a dry, well-ventilated area. Do not
store your camera with naphtha or camphor moth balls or in
locations that:
• are poorly ventilated or subject
to humidities of over 60%
• are next to equipment that produces strong electromagnetic
fields, such
as televisions or radios
• are exposed
to temperatures above 50 O( (122 OF) or below
-10 O( (14 OF)
Cleaning
Use a blower to remove dust and lint, then wipe gently with a
soft,
dry cloth. After using the camera at the beach or seaside,
wipe off sand or salt with a cloth lightly dampened in distilled
water and
dry thoroughly. Important: Dust or other foreign
matter inside the camera may cause damage not covered under
warranty.
_____ ~ __ •••• __ ••• _ •• _.", •••••• _ ••••• _ ••••• _ ••• ••• __ ••.•.. " •••••••• __ ••• ", ••••••. _ ••• " •.•• _ .•••• __ •.• __ • •• ",. • .., ••••••••••• ,._ .• _ , ••••••••••• 0 ~ •• _ •• ~ ••• " •• ~ •••••••••• ", •••• __ ~ ••••••••••• ,~
These glass elements are easily damaged. Remove dust and
lint with a blower. If using an aerosol blower, keep the can
vertical
to prevent the discharge of liquid. To remove
fingerprints and
other stains, apply a small amount of lens
cleaner
to a soft cloth and clean with care.
'"~~~ __ ~~~_~ __ ~~_.~w~~,,~_~~~~~ __ ._._~~_A_.~~~._,,~~. .~~ ~_. __ ,,~.~_.~. ~~ ~_. _
Remove dust and lint with a blower. When removing
Monitor fingerprints and other stains, wipe the surface lightly with a
soft cloth
or chamois leather. Do not apply pressure, as this
could result in damage
or malfunction.
Do not use alcohol, thinner, or other volatile chemicals.
391