Owner's Manual

6 Compose the shot.
Compose the shot and arrange the flash units as shown below.
Note
that the maximum distance at which the remote flash
units can be placed may vary
with shooting conditions.
Wireless remote
60
0
or less ...
'1
5 115 f
sensors on flash
10 m/33 ft. 30
0
or less \/ I m t. or
I
""
I \ ess units should face
or ess ~_ , ~" camera.
~--\~ -~~ ~u~;~~ flash)
30
0
or less "
'''-.. 5 milS ft. or
Remote
flash·~JI.' less
60
0
or less
7 Set the remote flash units to the selected channel.
Turn all the remote flash units on and set them to the channel
selected in Step
4. See the Speedlight instruction manuals for
details.
8 Raise the built-in flash.
Press the flash pop-up button to raise the built-in flash. Note
that even if - - is selected for Built-in flash>Mode, the built-
in flash must be raised
so that monitor preflashes will be
emitted.
9 Frame the photograph, focus, and shoot.
After confirming that the camera flash-ready light and the
flash-ready lights for all other flash units are lit, frame the
photograph, focus, and shoot. FV lock (pg. 192) can be used if
desired.
313