Owner's Manual

5 Select Done.
Highlight Done and press €B).
The specified focal length and [~.. ~
aperture will be stored under
the chosen lens number. This
combination
of focal length
and aperture
can be recalled at any time by selecting the lens
number using camera controls
as described below.
II Choosing a Lens Number Using Camera Controls
1 Assign non-CPU lens number selection to a camera
control.
Select Choose non-CPU lens number as the "+command
dials" option for a camera control in the Custom Settings
menu. Non-CPU lens number selection can be assigned
to the
Fn button (Custom Setting f5, Assign FUNC. button, pg. 320),
the depth-of-field preview
button (Custom Setting f6, Assign
preview button,
pg. 324), or the AE-UAF-L button (Custom
Setting f7,
Assign AE-L/AF-L button, pg. 325).
iii 2 Use the selected control to choose a lens number.
Press the selected button and rotate the main command dial
until the desired lens number
is displayed in the control panel.
Focal Maximum
length aperture
(~n~
"-----~
Lens number
212