Owner's Manual

To choose a metering method,
rotate
the metering selector until
the desired mode is displayed.
Metering selector
1(11
:25 F5.6 P 'so 2
1& 3D Color Matrix II Metering
In matrix metering, exposure is set using a 1OOS-segment RGB sensor. Use
a type Gar D lens for results that include range information (3D color
matrix metering
II; see page 370 for information on lens types). With other
CPU lenses, 3D range information is not included (color matrix metering
11). Color matrix metering is available when focal length and maximum
aperture
of non-CPU lens are specified using Non-CPU lens data item in
setup menu
(see page 211; center-weighted metering is used if focal
length
or aperture is not specified).
1& See Also
For information on choosing
the size of the area assigned the greatest
weight in center-weighted metering, see Custom Setting bS (Center-
weighted area, pg. 294). For information on making separate
adjustments
to optimal exposure for each metering method, see Custom
Setting b6 (Fine
tune optimal exposure, pg. 294).
113