Owner's Manual

ra Monitor Brightness
Monitor brightness can be adjusted by pressing
the
IE button while the view through the monitor
is displayed. Press .. or T to adjust brightness
(note
that monitor brightness has no effect on
pictures taken in live view mode).
To return to live
view, release
the IE button.
PI HDMI
When the camera is attached to an HDMI
video device,
the camera monitor will turn
off and the video device will display the
view through the lens as shown at right.
PI Remote Cords
If the shutter-release button on a remote cord (available separately; see
pg. 389) is pressed halfway for over a second in tripod mode, it will
activate contrast-detect autofocus.
If the remote cord shutter-release
button is pressed all the way down without focusing, focus will not be
adjusted before
the picture is taken.
101