Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Manual
- Reset
- Reset Custom Settings (Custom Menu Item)
- Two-Button Reset (Does Not Affect Custom Settings)
- Clock Set (Setup Menu Item)
- Image Quality & Size
- Table of Contents
- Introduction
- Supplied Accessories
- Parts & Controls
- Getting Started
- Basic Operation
- Advanced Operation
- Using the Camera Menus
- Optional Accessories
- Maintenance
- Troubleshooting
- Error Messages & Displays
- Available Settings & Default Values
- Using the Command Dial
- Memory Capacity / Image Size
- Specs
- Index
- Scans of Software CD-ROMS
- Scans of Supplied DVDs
- 55-200mm Lens Information
- Warranty for Supplied Lenses
- Warranty Extension Offer for Supplied Lens
- Camera Warranty
Dust
Off
Ref Photo
Acquire reference data for the Image Dust
Off
option
in
Capture
NX
(available separately; for more information,
see
the Capture
NX
manual).
1
Highlight
On and
press
OK.
The message shown at right will
be displayed.
2 With
the
lens ten centimeters (four inches) from a well-lit, featureless
white
object,
frame
the
object
so
that
it fills the viewfinder and then press
the
shutter-release but-
ton halfway.
In
autofocus mode, focus will automatically be set
to
infinity;
in
manual
focus mode, set focus
to
infinity manually.
3
Press
the
shutter-release
button
the
rest
of
the way
down
to
acquire Image Dust
Off
reference data. The
monitor
turns
off
when
the
shutter-release
button
is
pressed.
If
the
reference object
is
too
bright
or
too
dark, the camera
may be unable
to
acquire Image Dust
Off
reference data and
the
message shown at right will be displayed. Choose
another reference object and repeat
the
process from Step
1.
II
Image
Dust
Off
Dust
off
ref
photo
is
available
with
CPU
lenses only. A lens
with
a focal length
of
at least
50
mm
is
recommended.
If
using a zoom
lens,
zoom
all
the way in.
The same reference image
can
be used for photographs taken
with
different lenses
or
at different apertures. Reference images
can
not
be
viewed using
computer
imaging software. A grid pattern
is
displayed
when
reference images
are
viewed on the camera.
Image Dust
Off
is
used
to
reduce the effects
of
dust in
NEF
(RAW)
I
photographs.
See
the
Capture
NX
manual for more information. m
------
Menu
Guide/
Basic
Camera
Settings:
The
Setup
Menu
I
87