Owner's Manual

14: Built-in Flash (P, 5, A, and M Modes Only)
Choose a flash control mode for the built-in flash or the optional
SB-400 Speedlight.
TTL (default): Flash output is adjusted automatically in response to
shooting conditions.
Manual: The flash fires at the level selected in the menu shown at
right. At full power, the built-in flash
has a Guide Number of 18/59
(ISO 200, m/ft., 20°C/68°F).
A
~ icon flashes in the viewfinder and shooting information dis-
play
when Manual is selected.
. nal 58-400 Speed light
When an optional SB-400 Speedlight is attached, Custom Setting 14 is
used to choose the flash control mode for the SB-400 and the name
changes
to Optional Speedlight.
15:Auto off Timers
Choose how long the monitor and exposure meters ( 14)
remain on when no operations are performed. Choose a shorter
auto
off delay for longer battery life.
Option
Short
Normal
(default)
Long
Custom
Descr.iption
Monitor and exposure meters remain on for 4s. When Image review is on, pictures are
displayed in monitor for 4s after shooting 75).
Monitor and exposure meters remain on for 8s. When Image review is on, pictures are
displayed in
monitor for 4s after shooting 75).
Monitor remains on for 20s; exposure meters remain on for 1minute. When Image
review
is on, pictures are displayed in monitor for 20s after shooting ( 75).
Choose monitor off delay and image review time from 4s, 8s, 20s, 1minute, and
10minutes. Choose auto
meter-off delay from 4s, 8s, 20s, 1minute, or 30minutes.
Note that the shooting information display turns off automatically when the exposure
meters
tu rn off.
78 I Menu Guide/Custom Settings