Owner's Manual

I
Message Viewfinder Solution
~
~
Flash has fired at full power. View photo; if underex-
20,45,
-
posed, adjust settings and try again.
48,50,
(blinks)
76, 78
• Built-in flash is lowered: raise built-in flash.
34
•
Flash head on optional SB-400 Speedlight is in
99
~/11l
bounce-flash position.
-
(blinks)
•
SB-400 is unable to fully illuminate subject at cur- 99
rent lens focal length. Increase distance
to subject
(this warning
is not displayed with other optional
Speedlights).
Flash is in TIL mode. Choose
~
another setting or use a CPU
Change flash control mode for optional Speedlight.
100
lens.
(blinks)
buLb
No Bulb in S mode.
(blinks)
Change shutter speed or select mode M.
39-44
~
~
(blinks)
Unable
to measure white
,-",
.- ,
Camera unable to 01easure preset white balance.
~, "
47, 70
balance. Please try again.
(blinks)
Adjust exposure settings and try again.
Folder contains
no images.
• Insert another
memory card.
12
-
• Set Playback folder to All.
66
File does not contain image
Delete file or reformat
memory card.
13,
data.
-
20,65
Insert
new ink or toner cartridge in printer. If error
Check printer.
-
occurs with ink remaining in printer, check printer 60
status.
Error. Press shutter release
E,- ,-
Press shutter-release button again.
If error persists,
x,
consult with Nikon-authorized service representa-
button again.
(blinks)
tive.
16-17
Initialization error. Contact
,.
Nikon-authorized service rep-
c,- ,-
Contact Nikon-authorized service representative.
x
resentative.
(blinks)
~Help
A blinking is displayed in the monitor or viewfinder indicates that a description of the current prob-
lem can be viewed by pressing the
Gbutton.
1121 Technical NoteslTroubleshooting