Reference Manual

86
Shooting features
Scene mode (shooting suited to the shooting conditions)
2
F
rame the subject and take a picture.
•
The camera focuses on the area in the center of the frame. The position of the area
cannot be moved.
•
The camera focuses at innity.
•
For [Hand-held]:
-
While the
icon on the shooting screen is displayed in green, press the shutter-
r
elease button all the way to capture a series of images which are combined into a
single image and saved.
-
Once the shutter-release button is pressed all the way, hold the camera still until a
still image is displayed. After taking a picture, do not turn the camera o before
the screen switches to the shooting screen.
•
For [Tripod]:
-
One image is captured at a slow shutter speed when the shutter-release button is
pressed all the way.
Notes about [Hand-held]
•
T
he angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the shooting screen.
•
Continuous shooting may not be possible in certain shooting conditions.
Notes about [Tripod]
V
ibration reduction is disabled regardless of the setup menu
[V
ibration reduction]
setting. See “
Using a tripod (page 51)” when using a tripod.
Close-up
Use when tak
ing close-up pictures of small subjects such as owers and insects.
Rotate the mode dial to
button Close-up button
Option Description
Noise reduction burst This enables you to shoot a sharp image with a minimum of
noise.
Single shot
(default setting)
Saves images with emphasized outlines and contrast.
1
S
elect [Noise reduction burst] or [Single shot].