Reference Manual

280
If there is a problem
Error messages
Error messages
Check the f
ollowing if an error message is displayed.
•
If you cannot nd a relevant entry, also check “
Troubleshooting (page 267)”.
B
attery temperature is elevated. The camera will turn o.
The camera will turn o to prevent overheating.
The camera turns o aut
omatically. Wait until the camera or battery temperature has
cooled before resuming use.
Memory card is write protected.
The write-protect switch is locked. Unlock it.
Memory cards (page 288)
T
his card cannot be used.
This card cannot be read.
An error occurred while accessing the memory card.
•
Use an approved memory card.
Memory cards that can be used (page 40)
•
Check that the terminals are clean.
• Conrm that the memory card is correctly inserted.
Inserting the battery and memory card (page 39)
C
ard is not formatted. Format card?
The memory card has not been formatted for use in the camera.
F
ormatting deletes all data saved on the memory card. If you need to keep copies of
any images, make sure to select [No] and save the copies to a computer or other
medium before formatting the memory card. Select [Yes] and press the
button to
f
ormat the memory card.
Memory cards (page 288)
O
ut of memory.
Delete images or insert a new memory card.
I
mage cannot be saved.
• An error occurred while saving the image. Change the memory card, or use
[F
ormat card (page 239)] to format the memory card.