Reference Manual

246
Using the menu
The setup menu
button (setup) button Reset all button
When [Reset] is selec
ted, the camera’s settings are restored to their default values.
• The network menu settings are also restored to their default values.
To use the SnapBridge app, unpair in SnapBridge and then pair again.
Connecting to a smart device (page 223)
To use the ML-L7 Remote Control, pair it again.
Pairing the camera and remote control (page 264)
• Some settings, such as [Time zone and date] or [Language], are not reset. User
settings that were saved in of the mode dial are not reset. To reset these settings,
use [Reset user settings].
Resetting (user settings) mode (page 72)
•
You may not be able to select this setting while a wireless connection is
established.
Resetting le numb
ering
To reset le numbering to “0001”, delete all images saved on the memory card before
selecting [Reset all]. [Reset le numbering (page 244)] can also be used to reset to
“0001”.
Conformity marking
View the conformity markings that the camera complies with.
button (setup) button Conformity marking button
Firmware version
V
iew the current camera rmware version.
button (setup) button Firmware version button
• You may not be able to select this setting while a wireless connection is
established.