Reference Manual

34
Getting started
Inserting the battery and memory card
3
Close the batt
ery-chamber/memory card slot cover.
•
Lay the cover completely at in the direction indicated by the arrow (1), and fully
slide it in (2).
•
Sliding the co
ver while it is open may damage the camera.
Notes about waterproof and dustproof performance
Notes about shockproof, waterproof, and dustproof performance (page 16)
Formatting a memory card
T
he rst time you insert a memory card that has been used in another device into this
camera, make sure to format it with this camera.
•
Note that formatting a memory card permanently deletes all images and other
data on the memory card.
Be sure to make copies of any images you wish to keep before formatting the memory
card.
•
Insert the memory card into the camera and select the camera settings menu
[F
ormat card].
Removing the battery or memory card
Turn the camera o and make sure that the power-on lamp and screen have turned
o, and then open the battery-chamber/memory card slot cover.
• Move the yellow battery latch to eject the battery.
• Gently push the memory card into the camera to partially eject the memory card.
• Be careful when handling the camera, battery, and memory card immediately after
using the camera, as they may be hot.
Memory cards that can be used
T
he camera supports SD, SDHC, and SDXC memory cards.