Reference Manual

30
Parts of the camera
The power-on lamp
The power-on lamp
T
he power-on lamp turns on or ashes in the following situations.
Status Meaning
On
•
T
urns on immediately after the camera is turned on.
•
The camera is connected to a computer with the USB cable.
•
The power-on lamp turns on even if the camera is o when
communicating with a smart device through the camera settings menu
[N
etwork menu]
[Bluet
ooth]
[S
end while o].
Flashing
•
T
he camera is in standby mode because it has not been operated for
about three minutes.
The auto o func
tion (page 44)
•
The camera detects a human face when using [Underwater face
framing] in [Choose a style].
•
The camera is shooting while [Choose a style] is set to [Shoot at
intervals].
Flashing
quick
ly
•
[Battery exhausted.] is displayed on the screen. Charge or replace the
battery.
•
The inside of the camera or the battery has become hot. The camera
turns o automatically. Wait until the camera or battery temperature has
cooled before resuming use.