Reference Manual

182
If there is a problem
Troubleshooting
TVs, printers, computers
I
mages are not displayed on the TV.
• A computer or printer is connected to the camera.
•
The memory card contains no images.
• Remove the memory card to play back images in the internal memory.
Removing the battery or memory card (page 34)
T
he PictBridge startup screen is not displayed when the camera
is connected to a printer.
When [Charge by computer (page 148)] is set to [Auto], the PictBridge startup
screen may not be displayed and it may be impossible to print images with some
PictBridge-compatible printers. Set [Charge by computer] to [O] and reconnect
the camera to the printer.
Images to be printed are not displayed.
• The memory card contains no images.
•
Remove the memory card to print images in the internal memory.
Removing the battery or memory card (page 34)
C
annot select paper size with the camera.
The camera cannot be used to select the paper size in the following situations, even
when pr
inting from a PictBridge-compatible printer. Use the printer to select the
paper size.
• The printer does not support the paper sizes specied by the camera.
• The printer automatically selects the paper size.
Nikon Transfer 2 does not start when the camera is connected
to a computer.
• The camera is o.
•
The battery is exhausted.
Charge by computer (page 148)
•
The USB cable is not correctly connected.
Transferring images to a computer with ViewNX-i (page 160)
•
The camera is not recognized by the computer.
• The computer is not set to start Nikon Transfer 2 automatically. For more
information about Nikon Transfer 2, refer to ViewNX-i help.