Reference Manual

17
Introduction
<Important> Notes about shockproof, waterproof, and dustproof
per
formance and condensation
• If moisture such as water droplets adheres to the outside of the camera or inside of
the batt
ery-chamber/memory card slot cover, immediately wipe it o with a soft
dry cloth.
- If a foreign substance adheres to the outside of the camera or inside of the
battery-chamber/memory card slot cover, immediately remove it with a blower
or a soft cloth.
-
I
f a foreign substance adheres to the waterproof packing (1) inside the battery-
chamber/memory card slot cover, remove it with the included brush. Do not
use the included brush for anything other than cleaning the waterproof
packing.
• Do not leave the camera in cold conditions or in hot conditions of 40°C (104°F) or
mor
e for a long period of time.
- Doing so could cause deterioration of the waterproof performance.
- When using the camera underwater, make sure the water temperature is from
0°C to 40°C (32°F to 104°F).
• Do not use the camera at hot springs.
Before using the camera underwater
Check the items below before using the camera underwater.
• Make sure that there are no foreign substances inside the battery-chamber/
memory card slot cover.
• Make sure that the waterproof packing of the battery-chamber/memory card slot
cover is not cracked or deformed.
- Make sure that the waterproof packing is not detached from the camera.