Reference Manual

217
Technical Notes
ML-L7 Remote Control
6 Press and hold (for at least three seconds) the power button on
the remote control.
• Pairing starts for the camera and remote control. While the process is being
performed, the status lamp on the remote control flashes about every 0.5 second.
• When pairing is complete, a connection is
established between the camera and the remote
control. When you enter shooting mode, the Z
icon is displayed on the shooting screen.
• If a pairing failure message is displayed, perform
the procedure again from step 5.
Switching the Connection to a Smart Device
• Switch the connection from Remote control to Smart device in Choose
connection in the camera network menu (A161, 216).
• When the SnapBridge app is launched on your smart device, and a connection is
established between the camera and smart device, the s icon is displayed on the
shooting screen.
• See the included “SnapBridge Connection Guide” when establishing a wireless
connection with a smart device for the first time.
1 4 00
1400
2 5 m 0 s
25m 0s
1 / 25 0
1/250
F 5 .6
F5.6