Reference Manual

18
Getting Started
Camera Setup
7 Select whether to
automatically set the camera
clock.
• You can also synchronize the camera
clock to the time reported by the smart
device by selecting flexible button 3
(R Yes) when prompted and enabling
synchronization in the SnapBridge app.
• If you select flexible button 4 (S No), set the camera clock from the menus as
described in Step 2 on page 19.
8 Use J or K to select the
background design to be
displayed when a menu or
setting screen is displayed, and
press flexible button 4 (O).
• The background selection screen may
not be displayed depending on your
country or region. In this case, proceed to Step 9.
• To restore the default background design, press flexible button 3 (P).
9 Confirm the waterproofing-related
message and press K.
• There are seven message screens.
• Waterproofing-related messages are displayed in
the following situations.
- When turning on and setting the camera for the
first time
- When setting the camera to Shoot under
water (A37) or Underwater face framing (A38)
- When turning the camera on after charging
10Confirm the message on the
screen shown at right and
press flexible button 4 (O).
• The camera exits to the shooting
display when setup is complete.
Yes
No
Sync clock with smart
device?
Menu background
Waterproong precautions
After drying thoroughly, use
a cloth to remove any
droplets remaining on the
areas indicated.