Reference Manual

16
Getting Started
Camera Setup
2 Press flexible button 3 (O)
when the dialog at right is
displayed.
• If you do not wish to use a smart device
to configure the camera, press flexible
button 4 (S) (A19).
3 Pair (i.e., establish a Bluetooth link between) the camera and the
smart device.
• Android Devices with NFC Support
After checking that NFC is enabled on the smart
device, touch the camera Y (N-Mark) to the NFC
antenna on the smart device to launch the
SnapBridge app.
- If the SnapBridge download site is displayed,
download and install the app before repeating
the above steps.
• iOS Devices and Android Devices
Without NFC Support
Press the camera flexible button 3 (O).
The camera will wait for a connection;
launch the SnapBridge app on the
smart device and follow the on-screen
instructions to tap the name of the
camera you want to pair with.
Use SnapBridge to send photos
to your smart device and
share them online.
To skip this screen and
set SnapBridge later from
the Network menu, press X.
App
SnapBridge
Camera
On your smart device, go to the app
store and search for
SnapBridge. After installing,
open the SnapBridge app.
Connect to Camera
Camera name