Reference Manual

63
Using Menus
Using Preset Manual
Use the procedure below to measure the white balance value under the
lighting used during shooting.
1 Place a white or gray reference object under the lighting
that will be used during shooting.
2 Use the multi selector HI to
select Preset manual in the
White balance menu, and press
the k button.
• The camera zooms in to the position for
measuring white balance.
3 Select Measure.
• To apply the last measured value, select
Cancel and press the k button.
4 Frame the white or gray reference
object in the measuring window,
and press the k button to
measure the value.
• The shutter is released and measurement is
complete (no image is saved).
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting
using the flash, set White balance to Auto or Flash.
Cloudy
Cl o ud y
Fluorescent
Fl uo res ce n t
Incandescent
In c an d es c en t
Daylight
Da yl i gh t
Preset manual
Auto
Au to
White balance
Measure
Cancel
Preset manual
Measure
Cancel
Preset manual
Measuring window