DIGITAL CAMERA Quick Start Guide Introduction ii Preparing for Shooting 1 Basic Shooting and Playback Operations 7 Using Menus 13 Technical Notes 15
Introduction Read This First To get the most from this Nikon product, be sure to read “For Your Safety” (Avii-ix), and all other instructions thoroughly and keep them where they will be read by all who use the camera. • If you want to start using the camera right away, see “Preparing for Shooting” (A1) and “Basic Shooting and Playback Operations” (A7). Downloading the “Reference Manual” The Reference Manual (PDF format) provides more details in various languages on how to use this camera.
Confirming the Package Contents In the event that any items are missing, please contact the store where you purchased the camera. COOLPIX L340 Digital Camera Camera Strap Lens Cap LC-CP25 (with cord) USB Cable UC-E16 Quick Start Guide (this manual) Warranty LR6/L40 (AA-size) alkaline batteries (×4)* * The included batteries are for trial use only. NOTE: A memory card is not included with the camera. SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this manual.
Information and Precautions Life-Long Learning As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually updated information is available online at the following websites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe and Africa: http://www.europe-nikon.com/support/ • For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.
About the Manuals • No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. • Illustrations and monitor content shown in this manual may differ from the actual product. • Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice.
Disposing of Data Storage Devices Please note that deleting images or formatting data storage devices such as memory cards or built-in camera memory does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility.
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. This icon marks warnings, information that should be read before using this Nikon product, to prevent possible injury.
Do not leave the product where it will be exposed to extremely high temperatures, such as in an enclosed automobile or in direct sunlight Failure to observe this precaution could cause damage or fire. Observe caution when handling batteries Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries for use in this product: • Before replacing the batteries, turn the product off. If you are using an AC adapter, be sure it is unplugged.
• Do not handle the plug or battery charger with wet hands. Failure to observe this precaution could result in electric shock. • Do not use with travel converters or adapters designed to convert from one voltage to another or with DC-to-AC inverters. Failure to observe this precaution could damage the product or cause overheating or fire.
Notices Notices for Customers in the U.S.A. Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Notice for Customers in the State of California WARNING Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.
xii Introduction
Preparing for Shooting Attaching the Camera Strap and Lens Cap Attach the lens cap to the camera strap, and then attach the strap to the camera. Attach them at two places. B Lens Cap When the camera is not in use, protect the lens by attaching the lens cap.
Insert the Batteries and Memory Card 3 1 4 2 6 5 78 Memory card slot • Hold the camera upside down to prevent the batteries from falling out, confirm that the positive (+) and negative (–) terminals of the batteries are oriented correctly, and insert the batteries. • Slide the memory card in until it clicks into place (5). • Be careful not to insert the batteries or memory card upside-down or backward, as this could cause a malfunction.
B Notes About the Batteries • Do not combine old and new batteries or batteries of different makes or types. • Batteries with the following defects cannot be used: Batteries with peeling B Batteries with insulation that does not cover the area around the negative terminal Batteries with a flat negative terminal Notes About EN-MH2 Rechargeable Ni-MH Batteries When using EN-MH2 batteries with the camera, charge four batteries at a time using Battery Charger MH-73 (A16).
Turn the Camera On and Set the Display Language, Date, and Time When the camera is turned on for the first time, the language-selection screen and the date and time setting screen for the camera clock are displayed. 1 Remove the lens cap, and then press the power switch to turn on the camera. • The monitor turns on. • To turn the camera off, press the power switch again. 2 Use the multi selector HI to select the desired language and press the k button.
6 Set the date and time, and press the k button. • Use JK to select a field and then use HI to set the date and time. • Select the minute field and press the k button to confirm the setting. Date and time M D Y 01 01 2015 h m 00 00 Edit 7 When the confirmation dialog is displayed, use HI to select Yes and press the k button. 8 Press the A (shooting mode) button. • The lens extends. Date and time Press this button in shooting mode for shooting-mode selection menu.
C Changing the Language or the Date and Time Setting • You can change these settings using the Language and Time zone and date settings in the z setup menu (A13). • You can enable or disable daylight saving time in the z setup menu by selecting Time zone and date followed by Time zone. Press the multi selector K and then H to enable daylight saving time and move the clock forward one hour, or I to disable daylight saving time and move the clock back one hour.
Basic Shooting and Playback Operations Shooting with Scene Auto Selector Mode 1 Hold the camera steady. • Keep fingers and other objects away from the lens, flash, AF-assist illuminator, microphone, and speaker. 2 Frame the picture. • Move the zoom control to change the zoom lens position. • When the camera recognizes the shooting scene, the shooting mode icon changes accordingly.
3 Press the shutter-release button halfway. • When the subject is in focus, the focus area or focus indicator is displayed in green. • When you are using digital zoom, the camera focuses in the center of the frame and the focus area is not displayed. • If the focus area or focus indicator flashes, the camera is unable to focus. Modify the composition and try pressing the shutterrelease button halfway again. 1/250 4 B F 3.
Play Back Images 1 Press the c (playback) button to enter playback mode. • If you press and hold down the c button while the camera is turned off, the camera turns on in playback mode. 2 Use the multi selector to select an image to display. Display the previous image • Press and hold down HIJK to scroll through the images quickly. • To return to shooting mode, press the A button or shutter-release button.
Delete Images 1 Press the l (delete) button to delete the image currently displayed in the monitor. 2 Use the multi selector HI to select the desired deletion method and press the k button. • To exit without deleting, press the d button. 3 Delete Current image Erase selected images All images Select Yes and press the k button. • Deleted images cannot be recovered.
Changing the Shooting Mode The shooting modes described below are available. • x Scene auto selector The camera automatically recognizes the shooting scene when you frame a picture, making it easier to take pictures using settings that suit the scene. • b Scene mode Camera settings are optimized according to the scene that you select. • E Special effects Effects can be applied to images during shooting.
Using the Flash, Self-timer, Etc. When the shooting screen is displayed, you can press the multi selector H (m) J (n) I (p) K (o) to set the functions described below. • m Flash mode You can select a flash mode to match the shooting conditions when the flash is raised. • n Self-timer The camera releases the shutter 10 seconds after you press the shutterrelease button. • p Macro mode Use macro mode when you take close-up pictures. • o Exposure compensation You can adjust overall image brightness.
Using Menus You can set the menus listed below by pressing the d (menu) button. • A Shooting menu Available by pressing the d button when the shooting screen is displayed. Allows you to change image size and quality, continuous shooting settings, etc. • G Playback menu Available by pressing the d button when viewing images in full-frame playback mode or thumbnail playback mode. Allows you to edit images, play slide shows, etc.
3 Select a menu icon and press the k button. Time zone and date • The menu options become selectable. Date stamp Set up Monitor settings Vibration reduction AF assist Sound settings 4 Select a menu option and press the k button. • Certain menu options cannot be set depending on the current shooting mode or the state of the camera. 5 Select a setting and press the k button.
Technical Notes Caring for the Product Observe the precautions described below in addition to the warnings in “For Your Safety” (Avii–ix) when using or storing the device. The Camera Do Not Apply Strong Impact to the Camera The product may malfunction if subjected to strong shock or vibration. In addition, do not touch or apply force to the lens. Keep Dry The device will be damaged if immersed in water or subjected to high humidity.
Notes About the Monitor • Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction and has no effect on images recorded with the device. • Images in the monitor may be difficult to see under bright lighting.
Notes About Rechargeable Ni-MH Batteries • If you repeatedly charge rechargeable Ni-MH batteries while they still have some charge remaining, the message Battery exhausted. may be displayed prematurely when using the batteries. This is due to the “memory effect,” in which the amount of charge the batteries can hold decreases temporarily. Use the batteries until there is no charge remaining and they will return to their normal behavior. • Rechargeable Ni-MH batteries discharge even when not being used.
Cleaning and Storage Cleaning Do not use alcohol, thinner, or other volatile chemicals. Lens Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints or other stains that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts at the center of the lens and working toward the edges.
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Also, refer to the Reference Manual (PDF format) for further details on how to use this camera (Aii). A Problem Cause/Solution The camera is on but does not respond. Wait for recording to end. If the problem persists, turn the camera off.
Approved Memory Cards The following Secure Digital (SD) memory cards have been tested and approved for use in this camera. • Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording movies. When using a memory card with a lower Speed Class rating, movie recording may stop unexpectedly.
AVC Patent Portfolio License This product is licensed under the AVC Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.
22 Technical Notes
Technical Notes 23
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
