Owner's Manual

160
t
Multiple Exposure
Follow the steps below to record a series of two or three exposures in a single
photograph.
Multiple exposures can make use of RAW data from the camera image
sensor to produce colors noticeably superior to those in software-generated
photographic overlays.
❚❚ Creating a Multiple Exposure
Multiple exposures can not be recorded in live view. Exit live view before proceeding.
Note that at default settings, shooting will end and a multiple exposure will be
recorded automatically if no operations are performed for 30 s.
1 Select Multiple exposure in the
shooting menu.
Press the G button to display the menus.
Highlight Multiple exposure in the
shooting menu and press 2.
A Extended Recording Times
For an interval between exposures of more than 30 s, extend the meter-off delay using
Custom Setting c2 (Standby timer, 0 227). The maximum interval between exposures is
30 s longer than the option selected for Custom Setting c2. If the monitor has turned off
during playback or menu operations, shooting will end 30 s after the exposure meters turn
off and a multiple exposure will be created from the exposures that have been recorded to
that point.
(P, S, A, and M Modes Only)
G button