Owner's Manual

84
Troubleshooting
Problem Solution Page
The camera displays a TCP/
IP or ftp error.
Check settings for the host and/
or wireless LAN adapter and
adjust camera settings
appropriately.
10, 37, 54
Check firewall settings. 17, 20, 39
Confirm that you can write to the
destination folder on the ftp
server.
68, 75, 79
Change the current PASV mode
setting.
56
“Connecting to PC” does
not clear from the camera
display.
Check firewall settings. 17, 20
The camera displays the
message, “Ethernet cable is
not connected”.
Connect an Ethernet cable or
select a wireless transmitter for
Choose hardware.
8, 36
The camera displays a
memory card error.
Confirm that the card is properly
inserted.
8, 36
Transfer is interrupted
before all photographs are
sent.
Transfer will resume if the camera
is turned off and then on again.
17, 43