Owner's Manual
Table Of Contents
- Users Manual
- Table of Contents
- Q&A Index
- For Your Safety
- Notices
- Quick Start Guide
- Introduction
- Tutorial
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More About Playback
- Voice Memos
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Multi Selector Center Button
- f2: Multi Selector
- f3: Assign Fn Button
- f4: Assign Preview Button
- f5: Assign Sub-selector
- f6: Assign Sub-selector Center
- f7: Assign Fn Button (Vert.)
- f8: Shutter Spd & Aperture Lock
- f9: Assign BKT Button
- f10: Customize Command Dials
- f11: Release Button to Use Dial
- f12: Slot Empty Release Lock
- f13: Reverse Indicators
- f14: Assign Multi Selector (Vert.)
- f15: Playback Zoom
- f16: Assign Movie Record Button
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Network Guide
- Professional Setting Guide
58
❚❚ Protect If Marked for Upload
Select Ye s to automatically protect files
marked for upload to an ftp server. Protection
is removed as the files are uploaded.
❚❚ Send Folder
Select a folder for upload (image transfer and
ftp server connections only). All photos in the
selected folder (including those already
marked as “sent”) will be uploaded,
beginning immediately. Movies can not be
uploaded using this option; transfer movies during playback as
described on pages 15 and 41.
❚❚ Deselect All?
Select Ye s to remove transfer marking from
all images selected for upload to a computer
or ftp server (image transfer and ftp server
connections only). Upload of images with a
“sending” icon will immediately be
terminated.
❚❚ HTTP User Settings
Enter a user name and password for
connection to an http server (http server
connections only).
❚❚ MAC Address
Display the MAC address of the hardware
selected for Choose hardware (0 51). This
option is available only when Enable is
selected for Network connection.