Owner's Manual

Qptions Available in Live View
II ~ Color Sketch
1 Select live view.
Rotate the live view switch to raise the mirror and display
the view
through the lens in the monitor.
Live view switch
I:
t ' .. ' ... '
Outlines _' :- 0 +
2 Adjust options.
Press ® to display the options shown at right
(note that the options temporarily clear from the
display during autofocus).
Press. or'" to
highlight Vividness or Outlines and press <llIIII or
~ to change. Vividness can be increased to make
colors more saturated, or decreased for a washed-out, monochromatic effect,
while outlines can be made thicker or thinner. Increasing the thickness
of the
lines also makes colors more saturated. Press ® to exit when settings are
complete.
To exit live view, rotate the live view switch. The selected settings
will continue in effect and will apply
to photographs taken using the
viewfinder.
II ~I Miniature Effect
1 Select live view.
Rotate the live view switch to raise the mirror and display the view through the
lens in
the monitor.
2 Position the focus point. 0 I'l' ,I' ., .. " ,
Use the multi selector to position the focus point
in the area that will be in focus and then press the ~QOK IllI
shutter-release button halfway to focus (note v
that the options temporarily clear from the
display
during autofocus). To temporarily clear
miniature effect options from the display and enlarge the view in the
monitor
for precise focus, press~. Press ~~ to restore the miniature effect display.
58