Owner's Manual

Interval Timer Photography
The camera is equipped to take photographs automatically at preset intervals.
~ Before Shooting
Before beginning interval
timer photography, take a test shot at current settings and view
the results in
the monitor. To ensure that shooting starts at the desired time, check that the
camera clock
is set correctly (OJ 14).
Use of a tripod is recommended. Mount the camera on a tripod before shooting begins. To
ensure that shooting is not interrupted, be sure the battery is fully charged or use an
optional EH-Sb AC adapter and EP-SA power connector.
1 Select Interval timer shooting.
Press the MENU button to display the menus.
Highlight Interval timer shooting in the
shooting menu and press
~.
MENU button
2 Choose a starting time.
Choose from the following starting triggers.
• To start shooting immediately, highlight Now
and press
~. Shooting begins about 3 s
after settings are completed; proceed
to
Step 3.
• To choose astarting time, highlight Start time
and press ~ to display the start time
options shown at right.
Press -llIIII or ~ to
highlight hours or minutes and press" or
T to change. Press ~ to continue.
3 Choose the interval.
Press -llIIII or ~ to highlight hours, minutes, or
seconds and press" or T to choose an
interval longer than the slowest anticipated
shutter speed.
Press ~ to continue.
Interval timer shooting
Choose start time
'~'4~.
M::I Start time
a
•
41