Owner's Manual

78
t
Multiple Exposure
Follow the steps below to record a series of two or three exposures in a single
photograph.
Multiple exposures can make use of RAW data from the camera image
sensor to produce colors noticeably superior to those in software-generated
photographic overlays.
❚❚ Creating a Multiple Exposure
Multiple exposures can not be recorded in live view. Exit live view before proceeding.
Note that at default settings, shooting will end and a multiple exposure will be
recorded automatically if no operations are performed for about 30 s.
1 Select Multiple exposure.
Press the G button to display the menus.
Highlight Multiple exposure in the
shooting menu and press 2.
2 Enable multiple exposure mode.
Highlight Multiple exposure mode and
press 2.
The options shown at right will be displayed.
Highlight On and press J.
A Extended Recording Times
For an interval between exposures of more than 30 s, select On for the Image review
(0 150) option in the playback menu and extend the monitor-off delay for image review
using Custom Setting c2 (Auto off timers, 0 160). The maximum interval between
exposures is about 30 s longer than the option selected for Custom Setting c2.
If no
operations are performed for approximately 30 s after the monitor has turned off during
playback or menu operations, shooting will end and a multiple exposure will be created
from the exposures that have been recorded to that point.
G button