Owner's Manual
Table Of Contents
- Quick Start Guide
- Users Manual
- Q&A Index
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- Live View
- Recording and Viewing Movies
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure/Bracketing
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings:Fine-Tuning Camera Settings
- Reset Custom Settings
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- d1: Beep
- d2: Viewfinder Grid Display
- d3: ISO Display and Adjustment
- d4: Viewfinder Warning Display
- d5: Screen Tips
- d6: CL Mode Shooting Speed
- d7: Max. Continuous Release
- d8: File Number Sequence
- d9: Information Display
- d10: LCD Illumination
- d11: Exposure Delay Mode
- d12: Flash Warning
- d13: MB-D11 Battery Type
- d14: Battery Order
- e: Bracketing/Flash
- f: Controls
- The Setup Menu: Camera Setup
- The Retouch Menu:Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Scan of CD-ROM
- Lens Warranty
- Camera Warranty
159
t
Non-CPU Lenses
By specifying lens data (lens focal length and maximum aperture), the user can gain
access to a variety of CPU lens functions when using a non-CPU lens (0 270).
If the
focal length of the lens is known:
• Power zoom can be used with SB-900, SB-800, SB-700, and SB-600 flash units
(available separately)
• Lens focal length is listed (with an asterisk) in the playback photo info display
If the maximum aperture of the lens is known:
• The aperture value is displayed in the control panel and viewfinder
• Flash level is adjusted for changes in aperture
• Aperture is listed (with an asterisk) in the playback photo info display
Specifying both the focal length and maximum aperture of the lens:
• Enables color matrix metering (note that it may be necessary to use center-
weighted or spot metering to achieve accurate results with some lenses, including
Reflex-NIKKOR lenses)
• Improves the precision of center-weighted and spot metering and i-TTL balanced
fill-flash for digital SLR
The camera can store data for up to nine non-CPU lenses.
To enter or edit data for a
non-CPU lens:
1 Select Non-CPU lens data.
Press the G button to display the menus.
Highlight Non-CPU lens data in the setup
menu and press 2.
2 Choose a lens number.
Highlight Lens number and press 4 or 2 to
choose a lens number between 1 and 9.
G button