Owner's Manual
Table Of Contents
- Quick Start Guide
- Users Manual
- Q&A Index
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- Live View
- Recording and Viewing Movies
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure/Bracketing
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings:Fine-Tuning Camera Settings
- Reset Custom Settings
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- d1: Beep
- d2: Viewfinder Grid Display
- d3: ISO Display and Adjustment
- d4: Viewfinder Warning Display
- d5: Screen Tips
- d6: CL Mode Shooting Speed
- d7: Max. Continuous Release
- d8: File Number Sequence
- d9: Information Display
- d10: LCD Illumination
- d11: Exposure Delay Mode
- d12: Flash Warning
- d13: MB-D11 Battery Type
- d14: Battery Order
- e: Bracketing/Flash
- f: Controls
- The Setup Menu: Camera Setup
- The Retouch Menu:Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Scan of CD-ROM
- Lens Warranty
- Camera Warranty
158
t
❚❚ Pausing Interval Timer Photography
Interval timer photography can be paused by:
• Highlighting Start > Pause in the interval timer menu and pressing J
• Turning the camera off and then on again (if desired, the memory card can be
replaced while the camera is off)
• Rotating the release-mode dial or live view switch
To resume shooting:
1 Choose a new starting time.
Choose a new starting time as described on
page 155.
2 Resume shooting.
Highlight Restart and press J.
Note that if
interval timer photography was paused
during shooting, any shots remaining in the
current interval will be canceled.
❚❚ Interrupting Interval Timer Photography
Interval timer shooting will end automatically if the battery is exhausted.
Interval
timer photography can also be ended by:
• Selecting Start > Off in the interval timer menu
• Performing a two button reset (0 151)
• Selecting Reset shooting menu in the shooting menu (0 202)
• Changing bracketing settings (0 109)
• Terminating multiple exposure shooting (0 154)
Normal shooting will resume when interval timer photography ends.
❚❚ No Photograph
The camera will skip the current interval if any of the following situations persist for
eight seconds or more after the interval was due to start: the photograph or
photographs for the previous interval have yet to be taken, the memory buffer is full,
or the camera is unable to focus in AF-S or when single-servo AF is selected in AF-A
(note that the camera focuses again before each shot).
Shooting will resume with the
next interval.