Owner's Manual

Indicator
Monitor
This card is not formatted.
Format the card.
Card is full
Subject is too bright.
Subject is too dark.
. Viewfinder
(For)
(blinks)
F
u
UO/!1l
(blinks)
•
(blinks)
H:
.-
L L'
Solution
Format card or turn camera off and insert new memory
card.
• Reduce
quality or size.
• Delete photographs.
• Insert
new memory card.
Camera can
not focus using autofocus. Change
composition or focus manually.
•
Use a lower ISO sensitivity.
•
Use commercial ND filter.
•
In mode:
SIncrease shutter speed
AChoose a smaller aperture (larger f-number)
•
Use a higher ISO sensitivity.
•
Use flash.
• In mode:
SLower shutter speed
AChoose a larger aperture (smaller f-number)
Flash has fired at full power. Check photo in monitor; if
underexposed, adjust settings and try again.
No Bulb in S mode.
Flash is in TTL mode. Choose
another setting or use a CPU
lens.
bu tb
Change shutter speed or select manual exposure mode.
(blinks)
~
(blinks) Change flash mode setting on optional flash unit or use
CPU lens.
Flash error
~/!1l
(blinks)
!1l
(blinks)
•
Use the flash.
• Change distance
to subject, aperture, flash range, or
ISO sensitivity.
•
Lens focal length is less than 18 mm: use a longer focal
length.
• Optional 5B-400 flash
unit attached: flash is in bounce
position
or focus distance is very short. Continue
shooting;
if necessary, increase focus distance to
prevent shadows from appearing in photograph .
.- .... -_.... ~.- - -
Error occurred updating firmware for optional flash unit.
Contact Nikon-authorized service representative.
61