Owner's Manual

127
Q
High-Definition Devices
The camera can be connected to HDMI devices using a type C mini-pin HDMI cable
(available separately from third-party suppliers).
1 Turn the camera off.
Always turn the camera off before connecting or disconnecting an HDMI cable.
2 Connect the HDMI cable as shown.
3 Tune the device to the HDMI channel.
4 Turn the camera on and press the K button.
During playback, images will be displayed on the high-definition television or
monitor screen; the camera monitor will remain off.
A Third-Party A/V Cables
When using a third-party A/V cable to
connect the camera to a television, use a
cable about 1 m (3 ft.) long with two RCA jacks
and attach the larger of the supplied ferrite
cores (the core for A/V cables) to the A/V cable
as shown. Make a loop in the cable 10 cm
(3.9 in.) from the end that connects to the
camera (q) and attach the ferrite core (w).
D Close the Connector Cover
Close the connector cover when the connectors are not in use.
Foreign matter in the
connectors can interfere with data transfer.
qw
10 cm/3.9 in. or less
Connect to high-definition device
(choose cable with connector for
HDMI device)
Connect to
camera