Owner's Manual
Table Of Contents
- Quick Start Guide
- Users Manual
- Reference Manual (Supplied on CD-ROM)
- Using This Manual
- Table of Contents
- Parts & Controls
- Getting Started
- Basic Photography
- Creative Photography (Scene Modes)
- Basic Playback
- Guide Mode
- Live View - Framing Photographs in the Monitor
- Recording and Viewing Movies
- Release Mode
- Advanced Photography
- Advanced Playback
- Setup / Menus
- Navigating the Menus
- Playback Menu
- Shooting Menu
- Setup Menu
- List of Menu Options
- Reset Setup Options
- LCD Brightness
- Info Display Format
- Auto Info Display
- Video Mode
- Flicker Reduction
- Time Zone and Date
- Language
- Image Comment
- Auto Image Rotation
- Dust Off Ref Photo
- Auto Off Timers
- Self-Timer Delay
- Beep
- Rangefinder
- File Number Sequence
- Buttons
- Slot Empty Release Lock
- Date Imprint
- Storage Folder
- Eye-Fi Upload
- Firmware Version
- Retouch Menu
- Recent Settings
- Connection to a Computer
- Printing Photographs
- Playback on a TV
- Compatible Lenses
- Memory Card Compatibility
- Optional Accessories
- Care / Maintenance
- List of Available Settings
- Troubleshooting
- Error Messages
- Specs
- Index
- Correction to Manuals
- Scans of CD-ROMs
- Lens Warranty
- Camera Warranty
27
s
A The Shutter-Release Button
The camera has a two-stage shutter-release button.
The camera focuses when the shutter-
release button is pressed halfway.
To take the photograph, press the shutter-release button
the rest of the way down.
Focus: press halfway Shoot: press all the way down
A Auto-Meter Off
The viewfinder and information display will turn off if no operations are performed for about
8 seconds (auto-meter off), reducing the drain on the battery.
Press the shutter-release
button halfway to reactivate the display.
The auto-meter off delay can be selected using the
Auto off timers option in the setup menu (0 143).
8 s
Exposure meters on Exposure meters off Exposure meters on
A The Built-in Flash
If additional lighting is required for correct exposure in i mode, the
built-in flash will pop up automatically when the shutter-release
button is pressed halfway.
If the flash is raised, photographs can only
be taken when the flash-ready indicator (M) is displayed.
If the flash-
ready indicator is not displayed, the flash is charging; remove your
finger briefly from the shutter-release button and try again.
To save battery power when the flash is not in use, return it to its
closed position by pressing it gently downward till the latch clicks
into place.