Owner's Manual

Using an Optional Remote Control (Ai
Use the optional ML-L3 remote control for self-portraits (pg. 241) or to operate the
camera remotely.
~ Before Using the Remote Control
Before using the remote control for the first time, remove the clear plastic battery insulator
sheet.
1 Mount the camera on a tripod.
Mount the camera on a tripod or place the camera on a stable, level surface.
2 Select i~ or amode.
Press the QJJ button and rotate the main command dial to select one of the
following modes:
~ button Main command dial
Controlpanel
68
'"'" " ". ""-- •. "."" .. ~--."" -., .. _... . " " . ., ,,_.,,-,,~ " .. .,.,,,._-,,.,, _. "", " .. ----" "", _ -" •.....
Mode Description
.......... -.-......-.- ... __ .. _ ..... _. ; Shut:t'e-r-'refeasecraboiJt'Tsafterrem'otesE'utte';:~release"
iii~ Delayed remote I button is pressed.
.. ············!·shut:ter··released···whe·nremote··shut:ter~refeas·ebuttonis······
a Quick-response remote ;
Ipressed.
..................................... _ ) .
The camera will enter stand-by mode. At default settings, single frame or
continuous mode will be restored
if no operations are performed for about a
minute.
3 Frame the photograph.
Frame the photograph. If autofocus is in effect, the camera shutter-release
button can be used to set focus, although only the shutter-release button on
the remote control
can be used to release the shutter.