Owner's Manual

"Point-and-Shoot"Photography
(~O and c}) Modes)
This section describes how to take photographs in A&O (auto) mode, an
automatic "point-and-shoot" mode in which the majority of settings
are controlled by the camera in response to shooting conditions, and
in which
the flash will fire automatically if the subject is poorly lit. To
take photographs with the flash off while leaving the camera in
control
of other settings, rotate the mode dial to @ to select auto
(flash off) mode.
Step 1: Turn the Camera On
1 Turn the camera on.
Remove the lens cap and turn the camera on.
The control panel and viewfinder displays will
light.
Power switch
. ····················i·······
2 Check the battery level.
Check the battery level in the viewfinder or control panel.
Control panel .. 'vIeWfinder! . Description
.............. ~............ . ······"Batiery"fullycharged: .
..............................
(I~) 12 5 FS.6 lID
I AUTO Irr:i1
L.-J~.~
L~~AF'A ISO-AUTO P
--C::j [S 31]
NORM I!ml A
!Battery partially discharged.
34
elI·l..owb'attery. Ready fully-charged spare battery or prepare to
.............~~~r.~~?~t~~r.t .
~ ell i Battery exhausted; shutter release disabled. Charge or
(blinks) (blinks). exchange battery.
Note: when camera is"poweredbyoptionaIEFi~5a or EH-5 AC adapter,battery levelIs
not displayed; instead, a Cicon appears
in the shooting information display (pg. 10).