Owner's Manual

c4: Monitor off Delay
This option (available in all shooting modes) controls how long
the
monitor remains on when no operations are performed
during playback, image review, or when menus or shooting
information
is displayed. Choose from 4 s (the default for image
review),
lOs (the default for playback and shooting information),
20 s (the default for menus), 1 minute,S minutes, or
10 minutes.
Choose a shorter
monitor-off delay for longer battery life.
Regardless
of the setting chosen, the monitor remains on if no
operations are performed for about ten minutes when
the
camera is powered by an optional EH-Sa or EH-S AC adapter.
Option
45 45
10s 105
20s 205
1m 1 min.
5m 5 min.
10m 10 min.
cS: Remote on Duration
Choose how long the camera will wait for a signal from the
remote before cancelling delayed or quick-response remote
modes (pg.
68). Choose shorter times for longer battery life.
The default setting
is one minute.
This
option is available in all shooting modes.
Option
a 1m 1 min. (default)
a 5m 5 min.
a1lknl0min·.······ .
··a 15m 15 min.
d: Shooting/Dis~
dl:Beep
F5.E. ffil
,SO-AUT.8
[53 iJ
~ :25
r:T~I~
D~·~
qn
AF
.
A
NORMlmll A
At the default setting of On, a beep will sound when the camera focuses in single-
servo
AF (AF·S or when shooting stationary subjects in AF·A autofocus mode), while
the release
timer is counting down in self-timer and delayed remote modes (pg. 66,
68), or when a photograph is taken in quick-response remote mode (pg. 68). The
beep will
not sound when Off is selected.
This
option is available in all shooting modes. The current setting
is shown in the control panel: Jl is displayed when the beep is on,
~ when it is off.
180