Owner's Manual

94
ra Exposure Bracketing
The camera modifies exposure by varying shutter speed and aperture (programmed auto),
aperture (shutter-priority auto), or shutter speed (aperture-priority auto, manual exposure
mode). When
On is selected for ISO sensitivity auto control (pg. 166), the camera will
automatically vary
ISO sensitivity for optimum exposure when the limits of the camera
exposure system are exceeded.
In exposure bracketing, shutter speed will only be changed
after the camera
has adjusted ISO sensitivity.
ra Exposure and Flash Bracketing
In QhL and ~H modes, shooting will pause after the number of shots specified in the
bracketing program. Selecting auto or scene modes will cancel bracketing; bracketing will
resume when mode
P, S, A, or M is selected. Exposure and flash bracketing are cancelled when
WB bracketing or ADL bracketing is selected for Custom Setting e4 (Auto bracketing set;
pg.191).
ra Resuming Exposure or Flash Bracketing
If the memory card fills before all shots in the sequence have been taken, shooting can be
resumed from the next shot in the sequence after the memory card has been replaced or shots
have been deleted
to make room on the memory card. Ifthe camera is turned off before all
shots in the sequence have been taken, bracketing will resume from the next shot in the
sequence when the camera
is turned on.