Reference Manual

Table Of Contents
604
Connecting to HDMI Devices
D
No HDMI Output
HDMI output is not available when:
1920 × 1080 120p, 1920 × 1080 100p, or 1920 × 1080 slow-motion is
selected for frame size/frame rate, or
the camera is in movie mode and connected to a computer running
Camera Control Pro 2
D
[10 Bit] Selected for [Output Data Depth]
The HDMI signal will be output at a bit depth of 10 bits only to HDMI
recorders that support this option.
Regardless of the option selected for monitor mode, the display will
switch to the camera monitor and the viewfinder will turn off.
When 3840 × 2160 is selected for movie frame size:
- movies will not be recorded to memory cards inserted in the camera,
and
- the angle of view will be reduced to about 90%.
The indicators in the camera monitor will be displayed at low resolution.
No photos will be recorded when the shutter-release button is pressed
all the way down.
Electronic vibration reduction is disabled.
D
HLG Output
Optimal color reproduction can only be achieved if your storage device,
computer, monitor, operating system, software, and other equipment
support HDR (HLG). If a signal is received from the connected device
indicating that it supports HDR (HLG), the camera will respond with a
“gamma: HLG” identifier.