Owner's Manual

II The Lens Hood
The lens hood protects the lens and blocks stray light that
would otherwise cause flare or ghosting.
Attaching the Hood
►
• Confirm that the lens hood mounting mark (e) is aligned with
the lens hood lock mark (- 0 ) as shown in the illustration (@ ).
• When attaching or removing the hood , avoid gripping it too
tightly. When attaching or removing the hood, hold it near the
hood alignment mark (r).
• Vignetting may occur if the hood is not correctly attached.
• The hood can be reversed and mounted on the lens when not
1n use.
245