Owner's Manual

4 Holding the camera so that
light can enter the camera,
examine the filter for dust or
lint.
If no foreign objects are present,
proceed to Step 6.
5 Remove any dust and lint from
the low-pass filter with a
blower.
• Do not use a blower-brush. The
bristles could damage the filter.
• Dirt that cannot be removed with a
blower can only be removed by Nikon-authorized service
personnel. Under no circumstances should you touch or
wipe the filter.
6 Turn the camera off and replace the lens.
The mirror will return to the down position and the shutter
curtain will close.
Technical Notes 185