Owner's Manual
Table Of Contents
- D780 User's Manual
- Manuals
- Package Contents
- About This Manual
- Menu List
- For Your Safety
- Notices
- Getting to Know the Camera
- Camera Controls
- Index
- AF-S NIKKOR 24-120mm f/4G ED VR User Manual
- Notes on Safety Operations
- Nomenclature
- Major features
- Usable cameras and available functions
- Focusing
- Vibration reduction mode (VRⅡ)
- Focusing, zooming, and depth of field
- Using the lens hood
- The built-in flash and vignetting
- Recommended focusing screens
- Lens care
- Standard accessories
- Optional accessories
- Specifications
- Depth of Field
- Warranty
• Wireless Remote Controllers
• WR-R10 Wireless Remote Controller/WR-T10 Wireless Remote
Controller: When a WR-Rl 0 wireless
remote
controller
is
attached
to
accessory terminal,
the
camera can
be
controlled remotely using a
WR-T10 wireless remote controller.
- The
WR-R10
can also
be
used
to
control
radio-controlled flash units.
- For synchronized release
involving
more
than
one
camera, ready
multiple
cameras
with
paired WR-Rl 0
units
attached.
* When connecting
the
WR-R10,
be
sure
the
covers
for
the
accessory
terminal and
the
USB
and HDMI connectors are
fully
open.
•
WR-1
Wireless Remote Controller:
WR-1
units are used
with
WR
-
R10
or
WR-Tl 0 wireless remote controllers
or
with
other
WR-1
remote
controllers,
with
the
WR-1
units
functioning
as
either
transmitters
or
receivers. When a
WR
-Rl 0
or
a
WR-1
configured
as
a receiver
is
connected
to
the
camera accessory terminal, a
WR
-
Tl
0
or
a second
WR-1
configured
as
a
transmitter
can
be
used
to
take pictures remotely.
Camera settings can also be adjusted using a
WR-1
configured
as
a
transmitter.
*
Be
sure
the
firmware
for
the
WR
-Rl 0 and
WR-1
has been updated
to
the
latest versions
(WR-R10
firmware version 3.0
or
later and
WR-1
firmware
version 1.0.1
or
later). For
information
on
firmware updates,
see
the
Nikon website
for
your
area. Consult a Nikon-authorized service
representative
when
updating
the
firmware
for
the
WR
-
R10
from
versions
prior
to
version 2.0
to
version 3.0
or
later.
Technical Notes 167