Specification Sheet

o Nikon Multi-CAM 1000 autofocus sensor module with TTL phase detection, 11
focus points (including one cross-type sensor), and AF-assist illuminator (range
approx. 0.5 to 3m/1 ft 8 in. to 9 ft 10 in.)

o Detection range
o –1 to +19 EV (ISO 100, 20 °C/68 °F)

o Lens servo
o Single-servo AF (AF-S), Continuous-servo AF (AF-C), Auto AF-S/AF-C
selection (AF-A) ; predictive focus tracking activated automatically according to
subject status Manual focus (MF): Electronic rangefinder can be used

o Focus point
o 11 Can be selected from 11 focus points

o AF-area mode
o Single-point AF, dynamic-area AF, auto-area AF, 3D-tracking (11 points)

o Focus lock
o Focus can be locked by pressing shutter-release button halfway (single-servo AF)
or by pressing AE-L/AF-L button

o Built-in flash
o Auto, portrait, close up, night portrait, super vivid, pop, photo illustration, toy
camera effect: Auto flash with auto pop-up P, S, A, M: Manual pop-up with
button release

o Guide number
o Approx. 7/22, 8/26 with manual flash (m/ft, ISO 100, 20 °C/68 °F)

o Control
o TTL: i-TTL flash control using 420-pixel RGB sensor is available with built-in
flash; i-TTL balanced fill-flash for digital SLR is used with matrix and center-
weighted metering, standard i-TTL flash for digital SLR with spot metering

o Mode
o Auto, auto with red-eye reduction, auto slow sync, auto slow sync with red-eye
reduction, fill-flash, red-eye reduction, slow sync, slow sync with red-eye
reduction, rear-curtain with slow sync, rear-curtain sync, off

o Flash compensation
o Can be adjusted by -3 to +1 EV in steps of 1/3 EV in P, S, A, M, and scene modes

o Flash-ready indicator
o Lights when built-in flash or optional flash unit is fully charged; flashes after
flash is fired at full output