Owner's Manual

171Connections
5 Camera/smart device: Initiate pairing.
• Camera: Press J.
• Smart device: Tap PAIR (the button circled in the illustration
below, which may be labelled differently in different
versions of the operation system).
D Pairing Error
If you wait too long between pressing the button on the camera
and tapping the button in SnapBridge, pairing will fail and an error
will be displayed.
• Camera: Press J and return to Step 1.
• Smart device: Tap OK and return to Step 2.
A Pairing for the First Time
After completing pairing for the first time using the SnapBridge
app, you will be prompted to choose auto link (auto upload and
auto clock and location synchronization) options. This prompt will
not appear again, but auto link settings can be accessed at any time
using Auto link in the tab.