Owner's Manual

300 Technical Notes
Focus
Autofocus Nikon Multi-CAM 1000 autofocus sensor module
with TTL phase detection, 11 focus points
(including one cross-type sensor), and AF-assist
illuminator (range approx. 0.5–3m/1ft 8in.–9ft
10 in.)
Detection range –1 – +19 EV (ISO 100, 20 °C/68 °F)
Lens servo • Autofocus (AF): Single-servo AF (AF-S); continuous-
servo AF (AF-C); auto AF-S/AF-C selection (AF-A);
predictive focus tracking activated
automatically according to subject status
• Manual focus (MF): Electronic rangefinder can be
used
Focus point Can be selected from 11 focus points
AF-area mode Single-point AF, dynamic-area AF, auto-area AF,
3D-tracking (11 points)
Focus lock Focus can be locked by pressing shutter-release
button halfway (single-servo AF) or by pressing
A (L) button
Flash
Built-in flash i, k, n, o, S, T, U, ': Auto flash with auto pop-
up
P, S, A, M: Manual pop-up with button release
Guide Number Approx. 7/22, 8/26 with manual flash (m/ft,
ISO 100, 20 °C/68 °F)
Flash control TTL: i-TTL flash control using 420-pixel RGB sensor
is available with built-in flash; i-TTL balanced fill-
flash for digital SLR is used with matrix and center-
weighted metering, standard i-TTL flash for digital
SLR with spot metering
Flash mode Auto, auto with red-eye reduction, auto slow sync,
auto slow sync with red-eye reduction, fill-flash,
red-eye reduction, slow sync, slow sync with red-
eye reduction, rear-curtain with slow sync, rear-
curtain sync, off