User's Manual
76 Operator’s Manual ZM-520PA/521PA/530PA/531PA
Maintenance
7RXVHWKHWUDQVPLWWHULQVDIHDQGRSWLPXPFRQGLWLRQSHUIRUPPDLQWHQDQFHFKHFNHYHU\VL[
months.
7KHIROORZLQJXQLWVDUHQHFHVVDU\IRUVRPHFKHFNLQJLWHPV
$;*YLWDOVLJQVLPXODWRU
$;76S2
2
FKHFNHU
• Receiving monitor
CAUTION
Never disassemble or repair the transmitter. If there is any problem with the
transmitter, contact your Nihon Kohden representative.
NOTE
• The measurement accuracy of the above units must be managed to perform accurate
maintenance check.
• For details on the operation of the above units, refer to the manuals provided with these
units.
$PDLQWHQDQFHFKHFNVKHHWLVSURYLGHGDWWKHHQGRIWKLVVHFWLRQ0DNHDFRS\RIWKLVFKHFNVKHHW
EHIRUHSHUIRUPLQJPDLQWHQDQFHFKHFN
1. External Check
• There is no damage or dirt on the outside of the transmitter.
7KHEDWWHU\FDVHFRYHULVQRWGDPDJHGWKHVSULQJLV¿UPO\DWWDFKHGDQGWKHEDWWHU\FDVHFRYHU
FDQEHFORVHG¿UPO\
1RNH\VDUHGDPDJHG
• No electrode leads are damaged.
• There are no blood or chemicals on the transmitter.
• The springs in the battery compartment are not damaged or detached.
• Terminals in the battery case are not corroded.
2. Transmitter Channel
• The channel number label on the transmitter is not torn or removed.
• The channel of the transmitter matches the label.
The transmitter channel is displayed in the upper left corner of the screen. The channel number
also appears on the startup screen.