Manual

Safety Reference Owner's Manual

All

Nighthawk Custom Model

191

Firearms

fails to seat fully and securely, fails to release smoothly, or loads ammunition into the chamber of the

handgun erratically.

Check for dirt and debris in the magazine port, and clean or clear as needed.

front of the handgun and the body of the

magazine angled to match the angle of

grip as shown above.

Push the magazine into the magazine pa

until it is

lirmly seated and the magazine

retainer locks into place.

Securely hold the handgun with your shooting hand,

the magazine port pointing down as shown.

Insert the lip of the magazine into the magazine port

handgun with the ammunition feed opening pointing

with

of the

to the

PREPARING TO FlRE

LOADING THE CHAMBER

WARNING1

Keep the muzzle of the handgun pointed away from anyone and in a safe direction. For this

operation, the Thumb Safety must be in the READY or

FlRE position and the handgun will be capable

of firing a round. Your finger must be off the Trigger and outside of the Trigger Guard unless

directed to do otherwise by these

instnrctions.

Pull the slide fully back and inspect the chamber for dirt or debris. If the chamber needs cleaning or

clearing, push the Slide Lock UP to hold the slide open.

Load Ihe chamber by releasing the Slide Lock and allowing the slide to snap back into position on its

own. Do not interfere with its forward movement.

Set the Thumb Safety to the SAFE position unlil you have chosen a target and are prepared to

fire

the handgun.

?:..

FIRING THE HANDGUN

GENERAL PRECAUTIONS