Manual

Safety Reference Owner's Manual . All Nighthawk Custom Model 191 1 Firearms
tool. Push the lip of the extractor towards the side of the breach while depressing the extractor tip, until the
extractor passes the extractor hold located at the back of the breach face.
2. Turn the slide around so the rear of the slide faces up, exposing the back end of the partially-removed
extractor. Pull the extractor from the back of the slide. Use the punch tool as required for assistance in
releasing the extractor from its position.
HANDGUNMAINTENANCE-GENERALCARE
The NIGHTHAWK CUSTOM semi-automatic model handguns must be clean and properly lubricated to
function reliably and maintain optimum performance and accuracy. Proper maintenance can provide smooth
operation, minimize the wear of parts, and prevent malfunctions.
Periodic maintenance of this family of NIGHTHAWK CUSTOM handguns involves cleaning and lubrication
whenever any of the following conditions exist:
1. Before firing you NIGHTHAWK CUSTOM handgun for the first time.
2. After disassembling Me firearm. Disassembly removes lubrication from the moving parts and requires
that you properly apply a high quality lubricant intended for semi-automatic handguns upon
reassembly.
3. After shooting the firearm. Clean and lubricate the handgun to prevent corrosion and reduce friction
on moving parts caused by powder deposits that accumulate during shooting.
4. Before and after storing the handgun for more that a month. Firearms which have been stored for
long periods of time accumulate deposits of dust, dirt and sometimes
rust and other corrosive actions
caused by the environment.
5. After the handgun becomes wet or dirty. Excessive moisture of dirt within the firearm and around it
can create obstructions, causing an unsafe shooting condition.
WARNING!
Always empty a
firearm before cleaning. Be certaln to remove the magazine and any ammunition in
the
firearm's chamber before cleaning. Note: NIGHTHAWK CUSTOM model handguns must be
checked first by removing that magazine from the firearm to prevent a round from entering the
chamber.
HANDGUN MAINTENANCE - CLEANING
Properly cleaning and lubricating firearms requires a basic set of tools and supplies. Your NIGHTHAWK
CUSTOM handgun is a precision assembly. Only high quality tools and supplies should be used when
working on it.
Tools:
.
Bronze Bore-Cleaning Brush to remove heavy bore deposits from the barrel
Handgun Bore Cleaning Rod with Threaded End to receive Cleaning
Accessories
. Slotted Tip to hold Cleaning Patches
. Nylon Bristle Brush
Supplies:
.
Cleaning Patches - 100% Conon Flannel Cloth
Cleaning Rags - 100% Conon Flannel Cloth
. High-Quality Cleaning Solvent
.
High-Quality Gun Oil ' (available through NIGHTHAWK CUSTOM)