Manual
Safety Reference Owner's Manual
.
All Nighthawk Custom Model 191 1 Firearms
Never carry a loaded firearm when you climb a tree, cross a fence, jump over an obstacle, or go
across areas where you are likely to trip, slip, stumble or fall.
STORAGE
WARNING!
Never leave your firearm unattended
unUl you have unloaded it and secured it from unauthorized
handling and use.
Before storing or leaving this firearm unattended...
.
lmmed~ately remove the ammunition magazine from the firearm and check for an empty chamber.
Note: NIGHTHAWK CUSTOM Enforcer. Predator, and Talon model handguns must be checked by
first removing the ammunition magazine from the firearm to prevent a round from entering the
chamber.
Remove all unfired ammunition from the firearm. the magazine, clothing, and from around the
shooting area. Place unfired ammunition in a safe and separate location from the firearms.
.
Place the unloaded firearm in an appropriate storage case or holster.
Keep this and all firearms securely locked up and out of sight, away from any possibility of
unauthorized access or unexpected discovery, until ready to use.
Always remain aware of the danger of firearms. even when stored.
.
Check firearm storage frequently, to be certain the localion remains secure and has not been violated
in any way.
WARNING1
Store firearms and ammunition separately under lock and out of the sight of and beyond reach of
children, minors, and adolescents.
HANDGUN MAINTENANCE
-
DISASSEMBLY
WARNING!
Always remove the magazine and any ammunition in the
firearm's chamber before disassembly.
Always wear safety goggles during disassembly and reassembly to protect your eyes while handling
spring-loaded parts.
General preparations
...
.
Choose a clean, stable surface at which to comfortably disassemble the firearm. Allow sufficient room
to place the parts removed from the firearm without interfering with the disassembly process. To
prevent damage to the firearm, disassemble the firearm on a clean, lint-free cloth.
Read through the entire disassembly procedure before attempting to disassemble any of the
NIGHTHAWK CUSTOM model handguns.
The following disassembly procedure requires manual dexterity and specific tools. Seek the sewice of
a
qualiiied gunsmith for assistance if you are uncertain of your ability to perform the following
disassembly process.
Contact NIGHTHAWK CUSTOM for further clarification or instructions should any of the parts or
assemblies shown in the disassembly process of this manual appear different from those found on
your NIGHTHAWK CUSTOM model.
Tools and supplies:
Your NIGHTHAWK CUSTOM handgun is a precision assembly. Only high-quality tools and supplies should
be used when working on it.