User Manual

73
Index: Represents each camera.
Type of Alarms:
Notifications Check:
The Alarm Status notification message shows each camera’s alarm status. To prompt the Alarm Status message,
you should enable the “Show Message” check mark on the Camera>Motion or the Advanced>Events menus.
By default, this message is disabled.
Empty: No trigger detected.
Video Obstruction: Flags scenarios in which someone may cover the camera’s field of view or if they
are attempting to tamper with the video signal.
Motion Detection: Video motion detection occurs when there is movement in front of your camera.
Video Loss: Video loss is regarded as an alarm event and occurs any time the DVR does not receive an
active video signal on any of its inputs.
Green Check Mark: Unchecked alarm that already finished.
Red Check Mark: The alarm is happening.
7.6.3 Alarm Status